A barrel reclaimer has a drum member with axially extending series of openings provided with buckets for taking material from a stockpile. Bridge-type bucket wheel reclaimers and drum reclaimers. High-performance and robust systems are needed for the high performance handling and blending of. Barrel Reclaimer for Base mix. TRF’s Barrel Reclaimers are operation at major steel plants in India. The reclaim capacity of TRF Barrel Reclaimer is. TPH.
|Published (Last):||19 May 2004|
|PDF File Size:||11.59 Mb|
|ePub File Size:||9.7 Mb|
|Price:||Free* [*Free Regsitration Required]|
A variety of different machine types can be employed to reclaim stacked material from stockpiles.
Typical machines range from bridge-type bucket-wheel reclaimers to boom-type bucket-wheel reclaimers and drum reclaimers. TAKRAF bridge-type bucket-wheel reclaimers are primarily employed in applications where bulk material is to be homogenized with high required material flow rates.
Our typical machines cover the following flow rates and sizes:. Our machines are all specifically designed to our client’s requirements and incorporate various solutions according to their specific application.
In this manner, power transmission between bucket-wheel trolley and bridge is enhanced which has a positive effect on machine life. A number of further configurations are also able to be specified, ranging from the number of mounted bucket-wheel trolleys to the manner in which they are arranged.
Machines employing two bucket-wheel trolleys are able to achieve a higher reclamation rate, whilst also achieving greater homogenization at lower flow rate fluctuations. When installing two bucket-wheel trolleys, the trolleys can be mechanically linked so that they both share a common trolley drive system. A trolley speed controller, developed in-house by TAKRAF, is then employed as this increases interaction efficiency between the two bucket-wheel trolleys.
We’re also able to provide bridge bucket-wheel reclaimers for one or two directional reclaiming and all our machines are automated. TAKRAF boom-type bucket-wheel reclaimers are popular in applications where medium to high flow rates from dumps are being reclaimed.
This arrangement barerl in a reduced number of pivot joints. The pantograph arrangement ensures that with large boom loads, small changes in the point of balance are stabilized, which has a significantly positive impact on machine steadiness and tilt safety.
A drawback with this design however is the increased number of pivot joints. The majority of our boom-type bucket-wheel reclaimers are semi-automated; however, there is a growing trend towards full automation and we are able to supply fully automated machines too. These machines incorporate further control systems and sensor logic and are controlled and monitored from a central control room, doing without a machine control cabin.
Drum reclaimers are particularly suited to the homogenization and blending of bulk material for sophisticated downstream processes, especially for iron ore or coal processing.
BARREL TYPE BLENDER RECLAIMER & TRASNFER CAR
Our machines are all specifically designed to our client’s requirements and incorporate various solutions according to their specific application – our machines can be designed for one or two working directions. Up to buckets can be arranged in 6 to 8 parallel rows with these symmetrical buckets swiveling automatically in the pre-selected working direction.
The buckets continuously remove thin layers of material from the entire cross-section of the stockpile and discharge this onto a belt conveyor located within the drum.
As a result, the stockpile is levelled evenly and cleanly with each passage. For specific hard-working areas that are in contact with material i. Rakes are equipped with prongs or scraper rods, depending on particle size of material to be reclaimed, and create a continuous flow of material on the escarpment of the pile over the entire width directly into the reclaiming buckets.
In regions with extremely low temperatures, rakes can even be equipped with hardened tines that are able to break frozen surfaces. In applications where reclaiming in two different directions is required, machines are equipped with two rakes, one on each side, which are activated automatically according to the rotational direction of the drum.
Our drum reclaimers are fully automated and thus work in the absence of an operator through a variety of sensors and are controlled and monitored from a central control room. We boast a comprehensive reference list across all reclaimer types used in a variety of different applications.
This bi-directional reclaimer is equipped with two bucket wheels. To change the direction of the buckets, the reclaimer has an automatic bucket reversing system. The reclaimer is prepared for operation in automatic mode and remote control mode.
This reclaimer is for use in extreme climatic conditions with very low temperatures.
Barrel reclaimer – Metso
To check the reclaimed material flow a radar system is used. A semi-automatic control system eases the work for the operator. This reclaimer is of pantograph type and uses a cell less bucket wheel. It can operate in fully automated mode or in remote mode.
The reclaimer is designed with cell less narrel wheel and hydraulic bucket wheel drive. It has an automatic GPS positioning system. Two reclaimers of the same type are working on the same rail track. This two directional drum reclaimer is designed with self-aligning buckets. To go to the correct working position the reclaimer uses a GPS system.
In this project the reclaimer is working on two parallel stockpiles and it can be moved between with a transfer car. Bridge Bucket Wheel-Reclaimers Reclaimer with two separately driven bucket wheel and speed regulated trolley. Drum or Barrel Reclaimer Predestined for homogenizing of bulk materials for downstream processes.
Our typical machines cover the following flow rates and sizes: Drum Reclaimers Drum reclaimers are particularly suited to the homogenization and blending of bulk material for sophisticated downstream processes, especially for iron ore or coal processing.
The excellent mixing and blending effect of the drum or barrel reclaimer is achieved through: Continuous flow and trickling of material on the escarpment across the entire stockpile width Simultaneous reclaiming of thin layers of material over the entire stockpile cross-section Overlapping discharge of material onto the cross-belt conveyor Our typical machines cover the following flow rates and sizes: We’re able to design and build machines according to our client’s specific flow rate requirements.
We design, fabricate and supply a wide-range of reclaimer machines ranging from bridge bucket-wheel reclaimers to boom type bucket-wheel reclaimers and drum or barrel machines. Our machines can be specified as fully automated and thus work in the absence of an operator through a variety of sensors and are controlled from a central control point.
Bridge type dual Bucket Wheel Reclaimer in Australia. Bridge type Bucket Wheel Reclaimer in Russia. Boom type Bucket Wheel Reclaimer in Australia. Boom type Bucket Wheel Reclaimer in Brazil.